Set Up POS Hardware: POS-X EVO-MR4 - Card Reader (MSR)
- Unpack the POS-X EVO-MR4 - Card Reader (MSR). Includes MSR cover, MSR, and long screws.
- Gently lay the terminal face down and unscrew the temporary cover on the right side using a phillips-head screwdriver.
- Remove the temporary cover and pull out the plug cable. Securely fasten it to the MSR cable.
- Line up the two metal tabs with the terminal slots and push MSR in place.
- Tuck cables into the terminal leaving room for screw holes. Place MSR cover directly over the holes and screw into place with longer screws.
- Your POS-X EVO-MR4 - Card Reader (MSR) Magnetic Stripe Reader is now installed.
- Download the driver software here.