How to Set Up Point of Sale Hardware - POS Card Reader (MSR)

Set Up POS Hardware: POS-X EVO-MR4 - Card Reader (MSR)

1. Unpack the POS-X EVO-MR4 - Card Reader (MSR).  Includes MSR cover, MSR, and long screws.
   http://www.pos-x.com/pos-system-hardware/pos-systems/evo-tp4/#accessories
    
   
   
   
2. Gently lay the terminal face down and unscrew the temporary cover on the right side using a phillips-head screwdriver.
   
   
   
   
   
3. Remove the temporary cover and pull out the plug cable.  Securely fasten it to the MSR cable.
   
   
   
   
4. Line up the two metal tabs with the terminal slots and push MSR in place.
   
   
   
   
5. Tuck cables into the terminal leaving room for screw holes.  Place MSR cover directly over the holes and screw into place with longer screws.
   
   
   
   
   
6. Your POS-X EVO-MR4 - Card Reader (MSR) Magnetic Stripe Reader is now installed.
   
   
   
   
   
7. Download the driver software here.